Friday, January 30, 2015

Troubleshoot A Bryant Furnace Plus 80 Code 13

How do I Troubleshoot a Bryant Furnace Plus 80 Code 13?


The Bryant Company manufactures heating and cooling products for residential and commercial use, including thermostats, air cleaners, heat pumps, air conditioners and furnaces. The Bryant Plus 80 furnace offers up to 80 percent AFUE, a noise reduction system, pilot-free ignition, a separate filter cabinet and limited warranty. The furnace uses an electrical display to communicate functions and errors with the unit, including the error code 13. Troubleshooting this particular error code may help offer possible solutions to the issue. Does this Spark an idea?


Instructions


1. Turn off the Bryant furnace and unplug from the power supply. Wait 5 to 10 minutes before restoring power.


2. Locate the SSU switch, which is a gray box on the front of the furnace, and ensure the switch is turned "On".


3. Reset the two rollout switches by pressing, holding and then releasing the button. The rollout switches are side-by-side switches located on a black or grey box inside the front access panel.


4. Open the filter compartment and slide out the filter. Rinse the filter with water and dry thoroughly before returning to the furnace. Alternatively, replace with a new filter, available for purchase at most hardware or home retail stores.


5. Ensure the vents on the furnace are not blocked by furniture, draperies, toys or other objects, and that the return air grills throughout the house are free of obstruction.


6. Contact an authorized service technician if the above steps do not resolve the error code.

Tags: error code, Bryant Furnace, Bryant Furnace Plus, Furnace Plus, Furnace Plus Code, Plus Code, rollout switches